Screws and anchors

These #10 x 2" TEK screws are designed for fastening wood to metal without pre-drilling. The zinc-plated steel construction provides corrosion resistance and durability. The wafer head sits flush with the surface, while the reamer wings on the self-tapping thread widen the hole for smooth wood penetration. The self-drilling point pierces metal directly, eliminating the need for pilot holes. Square drive socket ensures secure bit engagement during installation. Ideal for framing, HVAC ductwork, and general wood-to-metal applications.

These #8 x 1/2" zinc-plated metal screws feature a truss head profile with square drive recess. The self-tapping thread and self-drilling point eliminate the need for pre-drilling in light-gauge metal applications. Designed for HVAC ductwork, metal framing, and sheet metal assembly where a low-profile fastener head is required.

These #10 x 3/4" steel truss head metal screws feature a white finish for discreet fastening on visible surfaces. The Type A sharp point and self-tapping thread eliminate pre-drilling in wood and sheet metal applications. Square drive recess ensures secure bit engagement and reduced cam-out. Ideal for window frames, door hardware, and trim work where appearance matters.

These #8 x 2 1/2" metal screws feature zinc-plated steel construction for corrosion resistance. The pan head design with square drive provides secure fastening and reduced cam-out. Type A sharp point and self-tapping threads allow installation in wood, plastic, and sheet metal without pre-drilling. Suitable for general construction, HVAC, and maintenance applications.

These zinc-plated steel #14 x 1 3/4" metal screws provide reliable fastening for wood, plastic, and metal applications. The self-tapping Type A point eliminates pre-drilling requirements, while the square drive ensures secure installation without cam-out. Pan head design offers good bearing surface and professional appearance. Ideal for general construction, repairs, and fabrication projects requiring durable multi-material fastening solutions.

These #8 x 3" zinc-plated steel metal screws feature a pan head with square drive for secure fastening. The Type A self-tapping point penetrates wood, plastic, and metal without pre-drilling. Durable zinc coating provides corrosion resistance for indoor and outdoor applications. Ideal for sheet metal work, HVAC installations, and general fastening projects requiring reliable holding power.

These #8 x 3/4" steel metal screws feature a self-tapping Type A point that eliminates pre-drilling. The pan head design with square drive provides secure fastening for fascia, aluminum soffit, and vinyl siding installations. Painted heads blend with surrounding materials. Each screw delivers reliable performance in sheet metal and exterior trim applications.

These #6 x 3/4" steel metal screws come in a pack of 12. Featuring a Type A self-tapping point, they install directly into aluminum soffit, fascia, and vinyl siding without pre-drilling. The square drive recess ensures secure fastening while the painted pan head blends with finished surfaces. Designed for exterior trim applications where corrosion resistance and a clean appearance matter.

These #6 x 5/8" metal screws are made from 18-8 stainless steel for corrosion resistance and durability. Featuring a pan head with square drive and Type A self-tapping point, they fasten into wood, plastic, and sheet metal without pre-drilling.

These #8 x 1 1/4" steel metal screws feature a painted pan head and square drive for secure fastening in exterior trim applications. The Type A self-tapping point eliminates pre-drilling, allowing direct installation into aluminum and vinyl materials. Designed for fascia, soffit, and siding projects where colour-matched hardware and corrosion resistance are essential.

These #12 x 1 3/4" zinc-plated steel metal screws feature a pan head with square drive for secure fastening. The self-tapping Type A point eliminates pre-drilling in wood, plastic, and sheet metal. Zinc plating provides corrosion resistance for interior and light exterior applications.

Built for trim and siding work, these #6 x 5/8" sheet metal screws fasten fascia, aluminum soffit, and vinyl siding with consistent results. The steel build delivers dependable strength, while a pan head in an ivory painted finish blends with surrounding surfaces. A square drive ensures secure bit engagement for easy installation. A sharp Type A point and self-tapping, full-length coarse thread drive without pre-drilling in suitable substrates. They’re a practical choice for maintenance, repairs, and small projects.

These #8 x 5/8" polished brass metal screws come in a pack of 18 units. Designed for aluminum and vinyl fascia and soffit installation, they feature a self-tapping thread and Type A point for efficient metal penetration. The screws require a #2 square drive bit for installation. Their brass construction provides corrosion resistance while maintaining a polished appearance on exterior trim applications.

These #6 x 5/8" steel metal screws feature a Type A self-tapping point that eliminates pre-drilling. The square drive recess ensures secure fastening, while the painted pan head blends with fascia, aluminum soffit, and vinyl siding. For exterior trim applications.

These #6 x 1 1/2" steel metal screws feature a Type A self-tapping point that eliminates pre-drilling. The painted pan head provides a finished appearance on fascia, aluminum soffit, and vinyl siding installations. Square drive recess ensures secure fastening with minimal cam-out. Sharp threading cuts cleanly into thin metal and plastic substrates. Durable steel construction withstands exterior exposure. For small repair and finishing projects.

These #12 x 1 1/4" TEK screws feature a hex head with integrated washer for secure fastening on sheet metal applications. The zinc-plated steel construction provides corrosion resistance for HVAC and ventilation duct work. Self-drilling point eliminates pre-drilling while the self-tapping thread cuts its own path for efficient installation. Designed for metal-to-metal connections where a strong, vibration-resistant hold is required.

Self-drilling Tek screw measuring #8 x 1/2" with integrated hex washer head. Black phosphate coating provides corrosion resistance for metal-to-metal fastening. Self-tapping threads and self-drilling point eliminate the need for pre-drilling, speeding up installation on sheet metal, steel studs, and HVAC ductwork. For small projects and repairs.

Zinc-plated metal screw measuring #12 x 2 inches with square drive recess. Features an extra-wide flat head for flush, discreet fastening on metal surfaces. The self-drilling point eliminates pre-drilling, speeding up installation on sheet metal, ductwork, and steel framing. For professional and residential metal fastening projects.

This zinc-plated metal screw measures #10 x 1 7/16" and features a wide wafer head with square drive. The self-drilling point eliminates pre-drilling, speeding up installation on metal studs and light-gauge steel framing. The flat, low-profile head sits flush for a clean finish on drywall and sheet metal applications.

These #8 x 3/8" brown pan head metal screws come in a box of 100. Constructed from durable steel with a Type A sharp point and self-tapping thread, they install directly without pre-drilling. The square drive recess ensures secure fastening, while the painted brown head blends seamlessly with fascia, aluminum soffit, and vinyl siding. Designed for exterior trim applications where colour matching and corrosion resistance matter.

These #8 x 3/8" steel screws feature a square drive head and Type A self-tapping point for efficient installation in aluminum soffit, vinyl siding, and fascia applications. The painted pan head design provides weather resistance while the self-tapping thread eliminates pre-drilling requirements. Sharp Type A point penetrates materials cleanly, making them ideal for exterior cladding and trim work where secure fastening is essential.

Designed for trim and cladding tasks, these #8 x 5/8" wood screws provide clean, reliable fastening on fascia, aluminum soffit, and vinyl siding. The zinc-plated steel body with a black finish blends in on visible surfaces and drives smoothly. A pan head pairs with a square (Robertson) #2 drive for secure bit engagement. The sharp Type A point and self-tapping thread allow installation without pre-drilling. They keep small projects and light jobs moving for both DIY users and professionals.

Simplify your fastening tasks with this 10-24 x 1 1/4" zinc-plated machine screw featuring the innovative Quadrex drive. Use either your Phillips or Robertson bit without switching tools. The type B self-tapping point starts easily in sheet metal and pre-drilled materials. Built to ASME B18.6.3 standards for reliable performance. Perfect for electrical panels, machinery assembly, and HVAC installations.

These #12 x 4" wafer head metal screws combine fast performance with a clean finish for metal fastening. The wide, low-profile head sits flush for a smooth, discreet look, while a square recessed drive ensures secure engagement with standard square bits. A self-drilling point removes the need for pilot holes, and self-tapping threads promote firm hold in sheet metal. The zinc-plated finish provides a glossy, metallic silver appearance. Supplied as a 100-pack in a clear plastic box for easy storage and identification, ideal for recurring tasks in the shop or on site.

These #11 x 13/16" wafer head metal screws are built for clean, efficient fastening on metal. The zinc-plated finish gives a uniform, silvery look, while the very large, low-profile head sits flush for a smooth, discreet result. A square drive recess works with standard square bits. The self-drilling point creates its own pilot hole, and the full-length, self-tapping thread forms the mating thread as you drive. They support repeated tasks and deliver consistent results for both professional jobs and DIY projects.

Built for metal-to-metal fastening, these #10 x 3/4" wafer-head screws deliver clean results and a dependable hold. The self-drilling point starts holes in metal, and the self-tapping thread cuts its own mating thread to speed installation. A wide, low-profile head sits flush for a smooth, discreet finish, while the square drive keeps the bit engaged to reduce cam-out. Zinc-plated metal with a silvery look suits everyday work in the shop or on site for installs and repairs.

This zinc-plated steel hex head screw with integrated washer provides reliable fastening for metal-to-metal applications requiring corrosion resistance. The self-tapping thread eliminates the need for pre-drilling into materials, while the Type A point ensures clean entry into sheet metal and light gauge steel components. The hex head design allows for efficient installation using standard hex drivers or socket wrenches. Ideal for HVAC ducting, metal roofing, automotive repairs, and general metalworking projects where secure attachment is critical.

This zinc-plated #14 x 1" hex head metal screw features an integrated washer and self-tapping thread for secure fastening into metal surfaces. The type A point design ensures clean penetration while the hex head provides reliable grip for power tools. Its zinc coating delivers corrosion resistance for both indoor and outdoor applications. Ideal for HVAC ductwork, metal roofing, and steel framing connections.

This zinc-plated #14 metal screw features a hex head with integrated washer and self-tapping thread design for efficient metal fastening. The Type A point enables drilling through sheet metal and thin gauge materials without pre-drilling requirements. The hex head with washer combination provides enhanced grip and bearing surface while preventing over-tightening damage to delicate materials. Suitable for fastening metal components in HVAC installations, electrical enclosures, and general metal fabrication projects where secure attachment is required.

This zinc-plated steel hex washer screw combines the fastening power of a #8 x 1 1/4" screw with an integrated washer for enhanced bearing surface and reduced material deformation. Self-tapping threads and Type A point penetrate metal sheets, brackets, and thin steel components without pre-drilling. The hex head design allows for high torque application using standard hex drivers or socket sets, making it efficient for HVAC ductwork, metal roofing, electrical panel installation, and general metal-to-metal fastening applications.

This pack of #8 x 1" metal screws is made for fastening and assembly on metal. Each screw combines a hexagonal head with an integrated one-piece washer and an external hex drive for use with a wrench or socket. The full-length, coarse self-tapping thread works with pilot holes, and the sharp Type A point starts cleanly. A zinc-plated silver finish provides a smooth, reflective appearance with uniform surfaces and clean edges. A practical format for installers and DIY users, it helps keep everyday repairs and builds organized.

Built for dependable fastening, these #6 x 3/4" screws combine the corrosion resistance of 18-8 stainless steel with easy, consistent installation. A square recess pan head delivers positive bit engagement and controlled driving. The sharp Type A point with self-tapping threads cuts its own path in wood, plastic, and metal, eliminating pre-drilling for many tasks. The shiny silver finish keeps assemblies looking clean and uniform. Supplied in a box of 100, they’re ready for professional jobs or DIY repairs where reliable performance and tidy results matter.

Built for jobsite and home projects, these #10 x 2-1/2" stainless screws deliver reliable fastening across wood, plastic, metal, and similar materials. The 18-8 stainless steel resists rust and features a polished silver finish. A square recess drive provides secure bit engagement, and the flat, countersunk head seats flush for clean results. The sharp Type A point with self-tapping threads starts quickly, often without pre-drilling, while the thread extends from tip to near the head for a strong hold. Supplied in a 100-pack to support efficient assembly and repairs.

These #10 x 2" self-tapping screws deliver reliable fastening in wood, plastic, metal, and other common materials. Made from 18-8 stainless steel, they provide durable strength and corrosion resistance. The square recess drive offers secure bit engagement, and the flat countersunk head seats flush for a clean finish. A sharp Type A point and self-tapping threads help drive without pre-drilling in many applications.

These #10 x 1.5" self-tapping screws handle fastening in wood, plastic, and metal at home or on the job. Made from 18-8 stainless steel, they deliver everyday durability and rust resistance. The flat countersunk head installs flush for a clean look, while the square recess provides secure bit engagement. A Type A thread and pointed tip start quickly without pre-drilling to speed installation. Finished in smooth, unpainted metallic silver, the screws come in a box of 100 to keep projects moving and spares on hand.

These #10 x 1-1/4" self-tapping screws are made of 18-8 stainless steel for durable, rust-resistant fastening in wood, plastic, and metal. The flat countersunk head seats flush for a clean result, and the square recessed drive engages securely with Robertson bits. A sharp Type A point starts easily and taps its own threads, installing without pre-drilling in many applications. Threads extend close to the head to hold thin stock firmly.

Ideal for fastening metal and more, these #10 x 3/4" screws are made from 18-8 stainless steel for reliable rust resistance. The square recessed drive delivers confident bit engagement, while the flat countersunk head sits flush for a clean, finished look. A sharp Type A point with self-tapping thread starts quickly and drives into wood, plastic, and metal without pre-drilling, saving time in installations and repairs.

These #6 x 2" metal screws provide dependable fastening for jobsite and home projects. Made of zinc-plated steel, they deliver smooth driving and clean seating with a square drive and pan head. A sharp Type A point with self-tapping thread drives without pre-drilling in wood, plastic, and metal. Full-length threads improve grip, and the shiny silver finish matches common hardware. Suit for repairs, assembly, and maintenance with consistent, durable results.

These #6 x 1 1/2" metal screws handle everyday assemblies and repairs at home or on site. Made of zinc-plated steel, they offer durable performance. A square recess with a pan head provides solid bit engagement for controlled driving. The sharp Type A point and self-tapping threads cut their own threads in wood, plastic, and metal, often without pre-drilling. A fully threaded shank grips along the length for a secure hold.

Built for everyday fastening, these #4 x 1/2" metal screws combine reliable grip with smooth driving. Zinc‑plated steel offers a shiny silver finish and durable performance. The square recess and pan head give positive bit engagement and clean seating. A sharp Type A point with self‑tapping threads installs without pre‑drilling in wood, plastic, metal, and similar materials. Full‑length threads hold along the entire shank.

These #7 x 1/2" metal screws fasten sheet metal, attach metal to wood, and secure other soft or thin unthreaded materials. Made of steel with a zinc coating, they offer corrosion resistance. The oversized slotted hex washer head spreads load for a strong hold and accepts automotive cap screw wrenches as well as slotted drivers. Coarse, full-length self-tapping threads with a sharp Type S point drive smoothly for quick installation in thin stock.

Designed for general fastening, these #10 x 3" screws deliver dependable performance for home and jobsite applications. Made from 18-8 stainless steel, they provide strong corrosion resistance for long-term use. The square (Robertson) drive ensures secure bit engagement, while the pan head seats cleanly on flat surfaces. A self-tapping thread with Type A point supports efficient installation in thin metal, wood, and plastic. Supplied in a 2-pack, they are well suited for repairs, light installations, and finishing work.

Self-tapping Phillips head screws engineered for secure fastening in metal applications. Zinc-plated steel construction provides excellent corrosion resistance and long-lasting durability. Modified pan head design with type S point ensures reliable penetration and superior holding power in various metal thicknesses. Ideal for chimney installations, metal bulkheads, HVAC ductwork, and sheet metal work where precise, dependable fastening is essential for professional results.

Get a good grip with this self-drilling square drive tek screw.

Get a good grip with this self-drilling square drive tek screw.

Get a good grip with this self-drilling square drive tek screw.

Get a good grip with this self-drilling square drive tek screw.

Get a good grip with this self-drilling square drive tek screw.