Cement, concrete and mortar

Designed for concrete work requiring a thickness of 2 inches (5 cm) or more, this pre-blended mix is ideal for both new construction and surface repair. It’s suitable for pouring slabs, sidewalks, stairs, and platforms, with light foot traffic typically allowed after 24 hours. The ready-to-use formulation ensures consistent results and simplifies the mixing process. Meeting ASTM C 387 compressive strength standards, it’s a solid choice for residential or light commercial projects.

This ready-to-use Type N mortar mix is designed for non-load-bearing masonry or applications requiring low compressive strength. Made with masonry cement and natural mortar sand, it’s compatible with clay bricks, concrete blocks, and stone. Use it indoors or outdoors for walls, partitions, or facades. Not suitable where a Type S mortar is specified. It meets or exceeds the CSA A179-14 standards when used as directed, offering a consistent and easy-to-apply solution for general masonry jobs.

Perfect for thin repairs or topping layers, this pre-mixed sand and Portland cement blend is ideal for applications up to 2 inches (5 cm) thick. It’s commonly used for resurfacing concrete, laying pavers, or setting shower bases. Trowel it for a smooth finish or use a broom or brush for textured surfaces. The controlled sand gradation ensures consistent results, and the mix meets ASTM C 387 strength specifications. Walk-on use is possible after about 24 hours.

This commercial-grade HPC grout and repair mortar is specifically designed to provide high initial strength. It features rapid setting and curing, and possesses high ultimate strength, ensuring excellent compressive strength. Ideal for projects requiring quick turnaround, it can be used as grout, repair mortar, and even concrete.

The Fastset HPC rapid-setting and shrinkage-compensated repair mortar is a high-strength repair material. Thanks to its polymer-enhanced formula, it benefits from additional qualities such as better adhesion, improved flexibility, reinforced compactness, and superior strength. Designed for structural repairs of vertical or overhead concrete and masonry surfaces, this mortar is perfect for maintaining structural integrity, avoiding cracks, and improving the durability and reliability of the work.

This Fastset HPC rapid-setting and shrinkage-compensated repair mortar is a high-strength repair material. It is polymer-enhanced, providing additional qualities such as better adhesion, increased flexibility, improved compactness, and greater strength. Designed for structural repairs of vertical or overhead concrete and masonry surfaces, it is ideal for maintaining structural integrity while avoiding cracks. It also improves the durability and reliability of the work.

This 1-1-6 mortar is a type N cement-lime mortar. It is primarily recommended for brick, architectural blocks, or stone structures. It offers good natural resistance to freeze/thaw cycles, while its flexibility and vapour permeability make it also ideal for interior plasters or the restoration of porous stone structures.

This fast-setting and curing concrete mix is ideal for use a few hours after final setting. It is perfect for all projects requiring quick commissioning, while allowing enough time for placement and finishing. Strength of 20.7 MPa at 3 hours and 48.3 MPa at 28 days.

This high-strength industrial-grade concrete stands out for its strength, which is twice that of ordinary concrete. Highly resistant to freeze/thaw cycles, it also offers great robustness against de-icing salts. It is therefore ideal for exposed areas such as steps or sidewalks. HR 8000 grade, it is made of a blend of industrial concretes to maintain its structural integrity and resist spalling. Strength of 31 MPa at 24 hours and 55 MPa at 28 days.

The TexNov conditioner is ideal to clean every kind of concretes.

The TexNov conditioner is ideal to clean every kind of concretes.

The TexNov conditioner is ideal to clean every kind of concretes.